3번에 수동설치 지우고 2번에 
!pip install -r requirements.txt
!mkdir repositories
!git clone https://github.com/CompVis/stable-diffusion.git repositories/stable-diffusion
!git clone https://github.com/CompVis/taming-transformers.git repositories/taming-transformers
!git clone https://github.com/sczhou/CodeFormer.git repositories/CodeFormer
!git clone https://github.com/salesforce/BLIP.git repositories/BLIP
!git clone https://github.com/Hafiidz/latent-diffusion repositories/latent-diffusion
!git clone https://github.com/crowsonkb/k-diffusion.git repositories/k-diffusion
!pip install -r repositories/CodeFormer/requirements.txt 

이거 넣으면 됨

구글드라이브에 저장같은 경우는 구글 드라이브 연동하고 웹ui 설정에서 저장 위치를 
/content/drive/MyDrive/IMAGE/txt2img-images
이런식으로 만들어서 저장한 config.json 파일을 받오게 만들면 수동으로 넣지 않고, 자동으로 구드에 들어가게 할 수도 있음.

설치도 저렇게 3단계로 나누지 않고

!git clone https://github.com/AUTOMATIC1111/stable-diffusion-webui
%cd stable-diffusion-webui

!pip install -r requirements.txt
!mkdir repositories
!git clone https://github.com/CompVis/stable-diffusion.git repositories/stable-diffusion
!git clone https://github.com/CompVis/taming-transformers.git repositories/taming-transformers
!git clone https://github.com/sczhou/CodeFormer.git repositories/CodeFormer
!git clone https://github.com/salesforce/BLIP.git repositories/BLIP
!git clone https://github.com/Hafiidz/latent-diffusion repositories/latent-diffusion
!git clone https://github.com/crowsonkb/k-diffusion.git repositories/k-diffusion
!pip install -r repositories/CodeFormer/requirements.txt 

import os
os.kill(os.getpid(), 9)

이렇게 이어서 만들어도 설치랑 런타임 종료까지 한방에 될걸?
이건 잘 모르는데 안 될 이유는 없음

첫 번째 돌릴 때는 문제 없었는데 모델 한 번 바꾸고 다시 돌리려니까

---------------------------------------------------------------------------
ModuleNotFoundError                       Traceback (most recent call last)
<ipython-input-3-75bc94f91c1d> in <module>
      2 sys.argv = ['webui.py', "--share", "--opt-split-attention"]
      3 
----> 4 import webui
      5 webui.webui()

5 frames
/content/stable-diffusion-webui/repositories/k-diffusion/k_diffusion/evaluation.py in <module>
      4 
      5 from cleanfid.inception_torchscript import InceptionV3W
----> 6 import clip
      7 from resize_right import resize
      8 import torch

ModuleNotFoundError: No module named 'clip'

라고 뜨면서 에러나네

오 멋져 ㄷ

Import os누르니까 (1번) 다운되는데 어캄?

어어 정보가 폭주한다

Can't run without a checkpoint. Find and place a .ckpt file into any of those locations. The program will exit.
이러는데 뭐가 문제일까요?